Blank bezel

Pin
Send
Share
Send

Purchased flowers for making jewelry are often sold defective, with a bunch of excess glue or simply decay. An example is snowdrops, which in different stores are also called tulips. In bunches they are small and several flowers come with marriage. To save money and get the perfect lush snowdrops for making the rim, they are best done on their own.
To do this, you need to purchase:
- blanks 4 cm red;
- blanks;
- silicone glue;
- silicone gun;
- wire;
- rim of red color;
So, let's begin!
The blanks look like this:

Red blanks must be cut in half, and green - 3 leaves each.

For each flower, 1.5 blanks of red color and only 3 green petals are needed.
To collect the snowdrop, apply a little glue to the half of the blank, as shown in the photo, and attach the wire.

Having fixed it, you can fold the bud.

To make it more magnificent, in the same way, you need to attach another half of the workpiece.

Next, glue must be applied to the front so that the petals are deployed.

The last step is gluing green leaves.

On the rim with a composition on one side, it is necessary to make 9-11 flowers, depending on what splendor of the product you need to get in the end.

Attach the finished flowers to the rim one at a time. If the rim is plastic, it is better to fix the composition from below using felt.

After all the flowers are fixed, you can cover the last junction of flowers with an ordinary bow.
These beautiful rims are obtained from ordinary cheap blanks. By the way, they come out 2 times cheaper than buying ready-made and, moreover, small snowdrops.

They can be used for the manufacture of rubber bands, hair clips, completely braid the rim. The combination of colors can be very different, so, having shown imagination, you can get a unique and original jewelry quite inexpensively.

Pin
Send
Share
Send

Watch the video: Resin in Bezels - complete tutorial by (December 2024).