DIY ORGANIZER

Send

From ordinary improvised materials, you can make a convenient organizer for a children's room with your own hands. It can be useful for storing various things for your baby: from sliders and vests to diapers and hygiene products for child care. The organizer for the baby is very easy to make from the most ordinary improvised means that are stored in every home. Children's organizer will not only simplify the life of parents, save a lot of space in the closet, but also help to conveniently store various things the baby.

Materials

Cloth, paper, cardboard (or finished box), scissors, tape, glue, ruler, stapler, stationery knife, pen (pencil), double-sided tape, ordinary tape.

Preparations for a children's organizer. Step-by-step instruction.

Before starting work on a children's organizer, it is necessary to measure the drawer or chest of drawers in which the baby's things will be stored. It is better to measure the size of the future organizer not end-to-end, but with a margin of 1-1.5 cm for additional space in the box. Measurements of the future basis for the organizer should be done individually, based on your wishes for the improvement of the space in the closet.
It is also necessary to plan in advance how the organizer will be located inside the box, and what size the inner boxes should be. For the convenience of storing various things, you can make boxes of different formats: large and small. The height of the box must be made a few centimeters less than a chest of drawers or cabinet.
For the basis of the children's organizer, we take an ordinary cardboard box, measure the desired size of the organizer and cut it out with a stationery knife. With the right measurement, you should get five parts: the base of the box and its four sides. Also, to save time, you can use a ready-made box of the required size. For example, from under shoes or small household appliances.

We glue cardboard blanks tightly with tape on both sides so that the base of the box is strong, does not fall apart and does not bend. Glue the sides to the base of the children's organizer. It is necessary that these sides stand on top of the base of the box, so that the new size of the organizer does not become an unpleasant surprise.

First, we fasten the opposite sides of the cardboard box. So it will be easier to determine how much extra you need to cut off on other parts of the sides of the organizer, if the workpieces were incorrectly measured. After the base of the children's organizer is ready, you can put the assembled boxes in the compartment of the box to make sure that the measurements correspond to the required size.

We proceed to further work on the children's organizer. With a centimeter meter, we measure the inside of the box, because cardboard can be different in thickness. We record measurements on paper for convenience.
Using a pencil (pen) and a ruler, make notes on the prepared fabric and cut out the inner side parts of the organizer of the required size. We attach the bottom of the box to the fabric and take measurements for the part with which we will glue the inner bottom.

We turn to measuring the outside of the organizer. We measure the outer perimeter of the box, transfer it to the fabric. To the measured dimensions of the fabric, add an additional 1.5-2 centimeters of excess material for work.

In order for the children's organizer to be more colorful and vibrant, you can use fabrics of two colors for the inside and outside. Thus, the organizer for the child will look more original.

You can also use monophonic fabric of bright color only for the base of the inside of the box (bottom of the box), as in the proposed workshop. And to collect all the other sides of the organizer from another material, for example, in the form of fairy-tale characters or funny animals.
In addition, the children's organizer can also be pasted with decorative bright paper. However, if parents plan to use a children's organizer for storing diapers, diapers, vests and romper baby, it is better to use fabric in work.

After preparing all the details for decorating the box, iron the fabric with iron. It is much more convenient to work with an even fabric, and the organizer will have a more neat and attractive appearance. It is also necessary to pre-iron the fabric part for the outside of the organizer. Iron the stripes a few centimeters with an iron.

Decorate a children's organizer. Step-by-step instruction.

Having bent the edge of the fabric by a centimeter in order to hide the joint later, it is necessary to fasten the fabric along the edge to the inside of the box with a stapler. The fabric must be tightly tightened around the perimeter of the box. After that, carefully fold the folds of fabric in the corners and glue with glue. You can also attach the fabric to a durable double-sided tape.

After this, it is necessary to take the part of the prepared material and lay it on the bottom of the box. After this, measurements should be made on the fabric with a pencil (pen) to bend all the necessary sides of the material to size. We bend the edges and iron them with an iron.

We glue the fabric blank with glue or double-sided tape to the bottom of the inside of the box. Gently lay on the bottom and press the fabric with your hands.

After that, glue the double-sided tape to the inner edge of the top of the box. You can use a long sheet of double-sided tape around the entire perimeter of the box, bending it on both sides at the edges. You can also stick adhesive tape in dotted lines on both sides of the organizer.

Remove the tape of double-sided tape and glue the fabric part for the outside of the organizer. Carefully glue the smoothed sides of the edge to the inside of the box.

Then you need to bend the fabric and stick it to the outer edge of the organizer, pulling the material well around the entire perimeter of the box. Box corners can be stapled together for durability.

Turn the box over and glue the tape to the outer bottom of the organizer. Next, remove the tape tape from the bottom of the outer part of the box and, avoiding creases on the fabric, firmly stick the material to the bottom using double-sided tape.

After that, a rectangle of the required size should be cut out of paper (white or color) and sealed with it on the outer bottom of the children's organizer.

To do this, correctly measure the bottom of the outside of the box. You will need a ruler and a pencil (pen) for measurements. If the box is large, then for pasting the box day you can use several sheets of A4 paper.

We glue the cut paper with glue or fasten it on a double-sided tape to the bottom of the children's organizer. If the rectangle was assembled from two halves of paper, the sides can conveniently be connected with ordinary tape on top.

After that, with an ordinary glue, you can glue all the errors of the organizer, if any. A bright and original organizer for a toddler’s nursery is ready for use.

In such boxes, you can conveniently store your baby's things in a vertical or horizontal position. In addition, such a convenient organizer for storing children's things will save a lot of space in the drawer and help to clean up the house.