With a simple home-made tool for a drilling machine, you can quickly drill a hole in the center of the workpiece without making markings. With a large amount of drilling work, this will save time.
For the manufacture of this homemade product you will need three pieces of a strip of metal 30 cm long, two segments 23 cm long, two segments 10 cm long. Also, bolts with nuts and a piece of the board will also be required.
First of all, it will be necessary to make markings and drill holes in each workpiece. The diameter of the holes is selected for the diameter of the bolts. Before drilling the workpiece must be tilted.
The main stages of work
From plywood or chipboard, it will be necessary to cut the base with dimensions of 21 * 50 cm. Two holes for bolts need to be drilled in it. And then we fasten two short pieces of metal strip.
At the next stage, the master fastens the remaining workpieces: first, two strips of metal 23 cm long (perpendicular to short segments), and then three strips 30 cm long.
You can watch the detailed process of making a homemade device for a drilling machine in the video on our website. Do you like this homemade product? Write about it in the comments below the video.
