Cleanliness and order in the workshop is the key to productive work. Anyway, it's nice to be in a room in which trash is not scattered anywhere and everything lies in its place.
Therefore, in this review, the author decided to share the idea of how to make a home-made version of a construction vacuum cleaner with your own hands.
The author uses a construction vacuum cleaner, which was previously purchased for cleaning the house. In fact, this will not be the manufacture of a new one, but the refinement of an existing construction vacuum cleaner.
The main stages of work
The plastic container itself, in which the garbage bag is located, is not required in this case. Only the upper part of the housing will be needed, in which there is an engine with a turbine, a filter and a hose pipe.
Modernization of the factory vacuum cleaner is to increase the volume of the garbage collection tank. That is, we remove the lower "native" part of the vacuum cleaner body, and instead use a barrel (plastic or metal).
The essence of the whole alteration is to attach the upper part of the vacuum cleaner to the lid of a metal barrel. Also, to create the correct vortex flows, plastic elbows for a sewer pipe with a diameter of 50 mm will also be required.
Two holes need to be drilled in the barrel lid, after which we insert the upper part of the vacuum cleaner, put on a paper filter and install the elbow for the plastic pipe.
For details on how to make a home version of a construction vacuum cleaner, see the video on our website.
