Sometimes you need to drill an accurate and accurate hole, but experience is not enough for this. To do this the first time, you can use a simple home-made guide for a drill (for perpendicular drilling).
Using a vertical rack with guides, you can increase the accuracy of drilling holes with a household electric drill. With this device, you can drill not only parts that are in a horizontal plane, but also make holes in the walls or ceiling.
In addition, you can even perform milling by installing the necessary mill instead of the drill. In general, the thing is useful. By the way, the guide is ideal for drilling holes for the dowel. You can make such a guide with your own hands.
The main stages of work
First of all, we cut a small piece of a square-shaped profile pipe. At the edges of the segment we weld two bushings. After that, you will need to weld a piece of pipe, which will then be put on the "neck" of the drill. We weld it between the bushings, in the middle of the profile.
After we welded a pipe segment, beat off the slag and clean the welds. From the workpiece you need to cut a small piece of a rectangular shape. Then, nuts are welded along the edges into which the bolt is screwed.
From the three segments of the steel strip, we weld the base of the U-shaped guide. Then cut off two round rods and weld them to the base. After that, we put on the springs and the previously manufactured part, and you can mount the drill.
We recommend watching a video in which it is clearly demonstrated how to make a simple home-made guide for a household electric drill. Any comments? Then write about it in the comments.
