Each master has his own secrets and tricks that he uses in the process of work. However, as they say: "Live and learn," therefore, useful advice from other masters will never be superfluous.
We bring to your attention a selection of interesting life hacks that will help you quickly restore the perfect order in the workplace and effectively solve other problems in the workshop or garage.
1. How to quickly assemble metal chips?
One of the easiest ways to clean the table after processing metal workpieces is to use a regular plastic bag and an old speaker (or powerful magnet).
2. How to drill a hole in a hairpin?
To do this evenly and strictly in the center, two nuts must be used: one must correspond to the diameter of the stud, and the second ½ of the diameter (for example, M10 and M5). They need to be pressed and screwed onto a hairpin.
3. How to install a disc from a grinder on an electric drill?
This is done in an elementary way - with the help of a bolt of the desired length, a pair of nuts and washers. Due to its simplicity and convenience, it turns out an excellent adapter in haste.
4. How to drill a hole in a thin plate?
This is easy to do by holding the steel plate in a vice with a wooden block or, for example, a plywood sheet.
5. What should I do if the cap of the bolt breaks?
The most reliable and proven way is to weld a nut of a suitable diameter to the stud and try to unscrew it again.
For how to properly apply these tips in practice, see the video on our website.
