Soft toy "Mignon"

Pin
Send
Share
Send

To sew a toy with your own hands, you do not need a lot of time and skill. Especially if this is done in a master class. Today I will tell you how to sew a Minion, a soft toy for myself, for a child or just as a gift to someone.
We will need quite a bit of fabric, yellow fleece, blue, white, black and gray. From blue we will sew overalls, from gray - glasses, from black - slippers and gloves, from white - eyes. Filler - for the inside of the toy. A wire - we put it in our hands and feet, so that they bend and take any shape, well, and an elastic band. But you can do without it. It is at your discretion. For eyes 2 buttons.
To start sewing, we are looking for a pattern on the Internet.
We cut a pattern according to it and according to the sizes indicated in the picture. Sew along all edges. That's what we got.

At the eye level, we make an incision so that all the edges are sutured. We stuff the toy with filler.

From white fleece we cut two identical circles - eyes. Size approximately 5 * 5. Sew manually, at the end we fill the eye with filler and sew. Volume eyes turn out.

From the yellow fleece we cut out exactly the same two eyes and draw on them as shown in the photo.

We cut oval details and sew them on top and bottom of the eye - these will be the eyelids.

Getting to sewing hands. We draw a hand on the yellow fleece, as shown in the photo. Arm length 20 centimeters.
Parts we need 4 pieces.

We measure the same length twice. Wrap the wire with a strip of padding polyester.

We put a hand on the resulting part. And we sew to the body.

In the same way we make legs.

We get such a Minion.

Now with the help of needles we mark the place of the position of the mouth. And flashing it.

Sew two buttons on the eyes.

Now you need to dress our Mignon. We sew gloves the same size as our hands.

Sew slippers. To do this, cut out the sole - a small oval.

For the sock, we cut out the details as in the photo, their length is equal to the length of the oval for the foot.

We cut two rectangles, the length is equal to the circumference of the foot (foot coverage).

We sew the oval part of the part to the foot.

Now on top of this stitched oval we make a small line. This is done so that the toe is round.

Sew the back seam and sew the sole with the rectangle.
It turned out such a slipper.
The toe of such a slipper can be filled with filler so that it is voluminous.
Cut out the jumpsuit. The width is equal to the width of the Mignon, the length is its length.

cut strips and sew them along - there will be straps for overalls.

Sew them with buttons to the jumpsuit.

It remains to carve out glasses. We cut glasses, the size is slightly larger than the size of the eyes.

It will take 2 parts. Cut a strip 2.5 cm wide, the length should be equal to the side of the glasses.

We also need 2 small strips of the same width, but the length will be equal to the inside of the glasses.

Now, in turn, we sew the strips to the edges of the front of the glasses and to the inside.

We turn the workpiece out and stuff it with filler. Sew. Sew an elastic band.

We put glasses on the Minion. Done.

Pin
Send
Share
Send

Watch the video: Reuse Old Socks Into Soft ToysConvert Old Socks Into ToyStuffed ToysLatest ToysRecyclevisha g (December 2024).